Photo of a wooden deck with steps leading up to an enclosed porch or balcony, surrounded by white railings and the exterior of a house.

Re-Surfx® DIY Kit: Bring Professional Strength Home

Order now

Restore, renew, and protect your deck, dock, or patio with the same high-performance system our certified installers use
now packaged for DIY homeowners. Designed to endure extreme weather conditions, this all-in-one kit makes it easy to achieve professional-grade results without costly replacement.

Re-Surfx® DIY Kit

  • ½ Gallon Primer – prepares the surface for maximum adhesion

  • 1 Gallon Resin – the backbone of the coating system

  • 1 Bag Aggregate (12 lbs.) – slip-resistant strength and texture

  • ½ Gallon Clear UV Coat – long-lasting protection against sun and weather

    $399 per kit
    Weight: 46 lbs
    Dimensions: 12" x 12" x 12"

    For bulk pricing, call us at 877-661-5640.

    Each kit covers between 120–200 sq. ft. depending on surface condition. 1 kit covers ~150 sq. ft. on average. Simply divide your total square footage by 150 to estimate how many kits (and stain gallons) you’ll need.

    What You’ll Need to Add:

  • 1 gallon of any solid-color water-based exterior stain (not included)

What’s Included in the Kit:

Coverage Guide

  • A lake scene with two Adirondack chairs and a small wooden table on a dock, with a backdrop of green trees and a clear blue sky, and a sign displaying boat dock sizes of approximately 80 to 150 square feet.

    Example: A 240 sq. ft. dock will require 2–3 kits and the same number of stain gallons, depending on wood condition.

  • A wooden deck overlooking a green, wooded backyard with tall trees and grass, with a sign: 'Patios ~200 sq. ft.'

    Example: A 300 sq. ft. wood patio in fair condition will require 2 kits and 2 gallons of stain.

  • Close-up of a swimming pool with a curved deck and a round drainage cover, advertising pool decks of approximately 200 square feet.

    Example: A 400 sq. ft. pool deck will require 2 kits and 2 gallons of stain.

  • Image of a wooden deck with outdoor furniture, an umbrella, and flowers, with text indicating dimensions and area of approximately 150-180 square feet.

    Example: A 300 sq. ft. backyard deck in fair condition will require 2 kits and 2 gallons of stain.

Why Choose the Re-Surfx® DIY Kit?

ORDER YOUR KIT TODAY
  • A wooden dock extending over water towards a beach with a large house in the background surrounded by trees and palm trees.

  • A wooden dock extending into the water with boats moored on both sides, cloudy sky overhead, and trees and buildings in the distance.

  • Marina with wooden docks and sailboats, residential houses, palm trees, and cloudy sky in the background.

  • Wooden dock extending into the water with boats moored on either side, water and trees in the background, sunny weather.

How to Apply Re-Surfx

  • Before You Start

    • Ensure wood is clean, dry, and free of debris.

    • Moisture content should be 15% or below (check with a moisture meter).

    • Ideal application temperature: 50–80°F.

    Step 1 – Prime the Surface

    Apply Re-Surfx® Primer evenly to clean, dry wood using a sprayer or 3/8" roller.

    • Allow to set for 10–15 minutes before moving to the next step.

    Step 2 – Mix Resin & Stain

    In a 5-gallon bucket combine:

    • 1 gallon of water-based solid color exterior stain (recommended: SuperDeck® Solid Stain)

    • 1 gallon of Re-Surfx® Resin

    Mix with a high-speed paddle mixer for 30 seconds.

    Step 3 – Add Aggregate

    Slowly add 1 full bag of aggregate while continuing to mix.

    • Once added, continue mixing for 1–2 minutes.

    • Scrape the sides of the bucket to ensure all white particles are fully blended.

    • Mixture should be thin, smooth, and easy to apply.

    Step 4 – Apply First Coat

    Using a 1 1/4" nap roller (brush for edges and cracks if needed), apply the mixture to the surface.

    Make sure all cracks and voids are filled on the first coat.

    Step 5 – Apply Second Coat

    Once the first coat is dry to the touch, apply a second coat using the same method.

    Coverage will typically be greater on the second coat.

    Step 6 – Seal With UV Protection

    Finish with a thin layer of Re-Surfx® Clear UV Coating using a sprayer or 3/8" roller.

    Curing

  • Before You Start

    • Surface must be clean, dry, and free of grease, oils, or debris.

    • Ideal application temperature: 50–80°F.

    • Make sure the concrete is dry to the touch before priming.

    Step 1 – Prime the Surface

    Apply Re-Surfx® Primer evenly to the clean, dry concrete surface.

    • Allow primer to set until dry to the touch.

    Step 2 – Mix Resin & Stain

    In a clean 5-gallon bucket, combine:

    • 2 gallons of water-based solid color concrete stain (recommended: H&C Heavy Shield or equivalent)

    • 1 gallon of Re-Surfx® Resin

    Mix thoroughly with a high-speed paddle mixer for 30 seconds.

    Step 3 – Add Aggregate

    Slowly add 1 bag of aggregate while mixing.

    • After all aggregate is added, continue mixing for 1–2 minutes.

    • Scrape bucket sides to ensure all white particles are blended.

    • Mixture should be thin, smooth, and easy to apply.

    Step 4 – Apply First Coat

    Apply using a 1/2" nap roller (brush may be used for edges or tight areas).

    • Make sure all cracks and voids are filled on the first coat.

    Step 5 – Apply Second Coat

    Once the first coat is dry to the touch, apply a second coat using the same method.

    • Coverage is typically greater on the second coat.

    Step 6 – Seal With UV Protection

    Finish with a thin layer of Re-Surfx® Clear UV Sealer using a 3/8" nap roller.

    Curing