Before You Start

• Ensure wood is clean, dry, and free of debris.

• Moisture content should be 15% or below (check with a moisture meter).

• Ideal application temperature: 50–80°F.

Step 1 – Prime the Surface

Apply Re-Surfx® Primer evenly to clean, dry wood using a sprayer or 3/8" roller.

• Allow to set for 10–15 minutes before moving to the next step.

Step 2 – Mix Resin & Stain

In a 5-gallon bucket combine:

• 1 gallon of water-based solid color exterior stain (recommended: SuperDeck® Solid Stain)

• 1 gallon of Re-Surfx® Resin

Mix with a high-speed paddle mixer for 30 seconds.

Step 3 – Add Aggregate

Slowly add 1 full bag of aggregate while continuing to mix.

• Once added, continue mixing for 1–2 minutes.

• Scrape the sides of the bucket to ensure all white particles are fully blended.

• Mixture should be thin, smooth, and easy to apply.

Step 4 – Apply First Coat

Using a 1 1/4" nap roller (brush for edges and cracks if needed), apply the mixture to the surface.

• Make sure all cracks and voids are filled on the first coat.

Step 5 – Apply Second Coat

Once the first coat is dry to the touch, apply a second coat using the same method.

• Coverage will typically be greater on the second coat.

Step 6 – Seal With UV Protection

Finish with a thin layer of Re-Surfx® Clear UV Coating using a sprayer or 3/8" roller.

Curing

• Allow 2–3 days for full curing.

• Keep furniture, pets, plants, and foot traffic off the surface until completely cured.